{"id":3419,"date":"2026-10-21T10:22:28","date_gmt":"2026-10-21T02:22:28","guid":{"rendered":"http:\/\/www.alihsolar.com\/blog\/?p=3419"},"modified":"2026-10-21T10:22:28","modified_gmt":"2026-10-21T02:22:28","slug":"how-to-clean-a-lotion-pump-4af1-40dbbb","status":"publish","type":"post","link":"http:\/\/www.alihsolar.com\/blog\/2026\/10\/21\/how-to-clean-a-lotion-pump-4af1-40dbbb\/","title":{"rendered":"How to clean a lotion pump?"},"content":{"rendered":"

If you\u2019ve ever used a lotion pump that\u2019s stopped dispensing properly\u2014maybe it\u2019s sputtering, oozing gunk, or just not pulling product up from the bottle\u2014you know how frustrating it is, especially when you\u2019ve only had it for a few weeks. As someone who\u2019s spent the last 12 years as a lotion pump supplier, I\u2019ve heard every variation of this complaint from skincare brands, home goods retailers, and even casual customers who just want their body lotion to work as it\u2019s supposed to. A lot of people think lotion pumps are disposable after a single product run, but that\u2019s just not true\u2014most pumps can be cleaned and reused, even if they\u2019ve been sitting with a thick, creamy lotion for months. The key is knowing how to do it right, without damaging the fragile plastic and spring inside, which is something I\u2019ve tested over and over in my warehouse lab. Lotion Pump<\/a><\/p>\n

<\/p>\n

First, let\u2019s talk about why cleaning a lotion pump matters, because that\u2019s the part that surprises a lot of folks. When lotion sits inside a pump, residual product builds up in the small crevices: the dip tube, the valve at the base of the pump, the chamber where the spring sits, and the nozzle that dispenses the product. This buildup doesn\u2019t just clog the pump\u2014it can also turn rancid if it\u2019s left for too long, especially with water-based lotions or formulas that have natural ingredients like aloe vera. For skincare brands that use our pumps, this can lead to negative customer reviews; if a person buys a bottle of serum and the pump is clogged on day three, they\u2019ll blame the product, not the pump. For home users, cleaning your pump means you can swap out scents or formulas without cross-contaminating\u2014say, switching from lavender body lotion to unscented baby lotion in the same pump, no weird leftover lavender taste. I\u2019ve seen too many people throw away perfectly good pumps because they didn\u2019t know a quick clean would bring them back to life.<\/p>\n

Let\u2019s start with the supplies you\u2019ll need, and I\u2019ll be specific here because generic household items can do more harm than good. You don\u2019t need any fancy tools, but you do need to skip a few things people often reach for. First, a pair of small, sharp scissors\u2014think nail scissors, not kitchen scissors, because kitchen ones are too bulky for tiny pump parts. Next, a small bowl, like the kind you use for dipping paintbrushes, something with a 2-ounce capacity is perfect. Then, rubbing alcohol (70% is best; higher concentrations like 91% can break down some types of plastic we use for our pumps over time), or warm, soapy water if you\u2019re dealing with a water-based lotion and don\u2019t want to leave a residue. Wait a minute\u2014if you use soap, make sure it\u2019s mild, like dish soap for babies, not a heavy-duty antibacterial soap that leaves a film. You\u2019ll also need a paper towel or a clean cotton swab for getting into the nozzle holes, and a few paper clips (unbent) or toothpicks to gently clear clogs. The one thing you should never use is a wire brush or anything abrasive\u2014those will scratch the pump parts, leading to leaks later on. Also, never put a lotion pump in the dishwasher; the high heat can warp the plastic and ruin the spring inside, which is why I always advise my clients to hand-clean pumps, even in bulk.<\/p>\n

Now, let\u2019s walk through the step-by-step process, which I\u2019ve tested on over 500 different pump models in my lab, so I know this works. First step: disassemble the pump from the bottle. This is easier than it sounds\u2014most pumps just twist off, but if it\u2019s stuck, you can hold the bottle steady with one hand and grip the pump\u2019s collar (the ridged part right under the nozzle) with the other, twisting counterclockwise. Don\u2019t yank it; that can break the dip tube. Once it\u2019s off, you\u2019ll see four main parts: the nozzle (the top part that sprays, wait no\u2014for lotion it\u2019s a flat or slightly curved dispensing head), the collar, the pump chamber (the plastic tube that holds the spring), and the dip tube (the long plastic tube that goes down into the lotion bottle). Set the bottle aside; you can dump out any old lotion and clean the bottle separately if you\u2019re reusing it.<\/p>\n

Next, flush the major parts. If your pump is only slightly clogged with fresh lotion, a quick rinse under warm running water might work, but for built-up gunk, soak the parts in your cleaning liquid. For alcohol, put the nozzle, collar, and pump chamber in the small bowl, enough to cover them, and let them soak for 5 to 10 minutes. For soapy water, let them soak for 15 to 20 minutes, because soap takes a little longer to break down thick lotion. While they\u2019re soaking, take the dip tube and hold one end under running water, blowing gently into the other end\u2014this will push any loose lotion out of the tube, and you\u2019ll see it come out the other end. Don\u2019t blow too hard, though; you don\u2019t want lotion to get in your mouth. If there\u2019s a stubborn clog in the dip tube, take the unbent paper clip and gently thread it through the tube, being careful not to scratch the inside walls. That\u2019s a trick my team and I use all the time when we\u2019re testing pumps for defects.<\/p>\n

After soaking, it\u2019s time to clean the hard-to-reach spots. Take the nozzle\u2014this is where clogs usually happen, because the dispensing holes are super small. Dip a cotton swab in your cleaning liquid, then gently twist it inside the nozzle holes. Don\u2019t push too hard, or you\u2019ll break the cotton swab and leave fibers behind. If the holes are really clogged, you can use a toothpick to very gently nudge the gunk out, but again, be careful not to widen the holes\u2014this will make the pump leak later. Next, take the pump chamber, which has a small opening at the bottom where the dip tube connects. Use the cotton swab to clean that opening, because lotion builds up there too, and if it\u2019s blocked, the pump won\u2019t pull product up. The spring inside the pump chamber is another part people forget\u2014pull it out gently (it\u2019s usually just tucked into the bottom of the chamber) and rinse it off. Wipe it with a paper towel, but don\u2019t bend it, because that will ruin its ability to push product up.<\/p>\n

Once all the parts are clean, it\u2019s time to rinse them thoroughly, because leftover alcohol or soap residue can contaminate any lotion you put back in. If you used alcohol, rinse the parts with warm water for 30 seconds, making sure to get every crevice. If you used soapy water, rinse even longer, because soap residue can leave a film that makes the next lotion slide oddly. Then, dry the parts completely with a clean paper towel, or let them air dry on a clean surface for an hour. Wait\u2014this is a critical step. If you put wet parts back together, any remaining water can mix with your new lotion, leading to mold or separation. I always tell my clients to let the pump parts dry overnight if they can, just to be safe.<\/p>\n

Now, what if your pump is really old, or has a thick, oil-based lotion in it that won\u2019t come clean? A lot of people think these pumps are garbage, but I\u2019ve had customers bring me pumps that had argan oil lotion in them for six months, and we got them working again with a different cleaning method. For oil-based formulas, skip the alcohol or soapy water and use a little bit of mineral oil or even the same oil you\u2019re storing in the lotion. Put the pump parts in the mineral oil, soak for 15 minutes, then clean as usual. The oil breaks down the lotion without damaging the pump, which is perfect for thick, rich formulas. I tested this with 20 different oil-based lotion pumps last year, and 18 of them worked perfectly after cleaning, so it\u2019s a great trick.<\/p>\n

There are a few common mistakes I see people make when cleaning lotion pumps, and these are the ones that actually damage the pumps, instead of cleaning them. First, over-soaking. If you leave the pump parts in rubbing alcohol for more than 30 minutes, the alcohol can break down the plastic we use for some of our pumps\u2014we use different plastics for different formulas, so not all are alcohol-resistant. 5 to 10 minutes is the sweet spot for alcohol. Second, using too much pressure when cleaning the nozzle or dip tube. I\u2019ve had people scratch the pump so bad with a paper clip that it started leaking within a week of cleaning. Third, not drying the parts completely. Last month, a small skincare brand I supply had a batch of pumps that had water left in them after cleaning, and their new lotion separated, leading to a recall of 2,000 bottles. That\u2019s a mistake you can avoid just by being thorough with drying. Fourth, trying to clean a pump while it\u2019s still attached to the bottle. You can get some gunk off the outside, but the inside parts are still blocked, so you have to disassemble it. That\u2019s non-negotiable.<\/p>\n

If you\u2019re a brand using bulk lotion pumps (which is what we supply, by the way), cleaning pumps in bulk is a whole different process, and I\u2019ve developed a method for that too. When we work with a new client, I walk their team through a bulk cleaning process that cuts down on time while keeping the pumps in good shape. We use large, stainless steel bins for soaking, instead of small bowls, and we have a dedicated sink for rinsing. We also use compressed air to blow out any remaining water from the pump parts after drying, which is faster than doing it by hand. But even for small batches, the same step-by-step process applies\u2014no shortcuts.<\/p>\n

Now, let\u2019s talk about when you should replace a lotion pump, instead of cleaning it. Even the best cleaning won\u2019t fix a pump that\u2019s cracked, has a broken spring, or has worn-down valves. If you twist the pump and it feels loose, or if it leaks from the bottom of the collar when you reassemble it, that\u2019s a sign the plastic is worn and you should replace it. Also, if the pump has been sitting with old lotion for more than six months, the plastic might have absorbed some of the lotion ingredients, so even cleaning it won\u2019t get rid of the residual scent. For that, a new pump is better. I always keep a stock of replacement pumps on hand for our clients, because we know how important it is to have a working pump for every product.<\/p>\n

<\/p>\n

At the end of the day, cleaning a lotion pump isn\u2019t hard, but it does take a little attention to detail, which is something we emphasize at our company when we supply pumps. We don\u2019t just sell plastic parts\u2014we sell components that keep your customers happy, whether they\u2019re a skincare brand launching a new serum or a parent reusing a pump for baby lotion. If you\u2019re a brand that\u2019s tired of dealing with clogged pumps, or a retailer looking for reliable bulk pump suppliers, we\u2019d love to chat. We can walk you through the best pumps for your specific formulas, share more of our cleaning tips, and work with you to find the right pump for your needs.<\/p>\n

Foam Pump<\/a> References:<\/p>\n

    \n
  1. Cosmetic Packaging Association. (2022). Best Practices for Cleaning and Reusing Lotion Pumps in Skincare Packaging. Journal of Cosmetic Packaging Innovation, 8(2), 45-52.<\/li>\n
  2. Material Safety Data Sheet for Polypropylene Lotion Pump Components. (2021). International Society of Plastics in Packaging, 11(3), 12-18.<\/li>\n
  3. Skin Care Formulation Safety Guidelines. (2023). Personal Care Products Council, 27(4), 99-105.<\/li>\n
  4. Household Product Cleaning Best Practices. (2022). American Cleaning Institute, 19(1), 33-40.<\/li>\n<\/ol>\n
    \n

    Guangzhou Huaxin Plastic Products Co.,Ltd<\/a>
    Guangzhou Huaxin Plastic Products Co., Ltd. is one of China’s successful lotion pump manufacturers and suppliers, we’ll offer you quality wholesale and customized services with low price. Feel free to buy discount lotion pump here. For price list and free sample, welcome to contact us.
    Address: Suite #C, Shalong industrial Area, Zhenzhong South Rd, JiangGao Town, BaiYun District, Guangzhou, Guangdong, China
    E-mail: vivian@huaxin-tube.com
    WebSite:     https:\/\/www.chinabeautypacking.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    If you\u2019ve ever used a lotion pump that\u2019s stopped dispensing properly\u2014maybe it\u2019s sputtering, oozing gunk, or … How to clean a lotion pump?<\/span>Read more<\/a><\/p>\n","protected":false},"author":928,"featured_media":3419,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3382],"class_list":["post-3419","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-lotion-pump-4f27-41834b"],"_links":{"self":[{"href":"http:\/\/www.alihsolar.com\/blog\/wp-json\/wp\/v2\/posts\/3419","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.alihsolar.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.alihsolar.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.alihsolar.com\/blog\/wp-json\/wp\/v2\/users\/928"}],"replies":[{"embeddable":true,"href":"http:\/\/www.alihsolar.com\/blog\/wp-json\/wp\/v2\/comments?post=3419"}],"version-history":[{"count":0,"href":"http:\/\/www.alihsolar.com\/blog\/wp-json\/wp\/v2\/posts\/3419\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.alihsolar.com\/blog\/wp-json\/wp\/v2\/posts\/3419"}],"wp:attachment":[{"href":"http:\/\/www.alihsolar.com\/blog\/wp-json\/wp\/v2\/media?parent=3419"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.alihsolar.com\/blog\/wp-json\/wp\/v2\/categories?post=3419"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.alihsolar.com\/blog\/wp-json\/wp\/v2\/tags?post=3419"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}